To order the desired products, you need to login.
|
|
08ps (GOST 1050-88)
| 22,25,28,32 × 120,137,158,170,175,180,221,239,300,315,321,342;
22,25 × 512
| The coil inside diameters: 180?30 mm and 250?30 mm.
The coil outside diameter should not exceed 750 mm.
Consumption of tin applied through hot dipping to both sides of substrate should be within the following range: 24.0 to 36.0 g⁄m².
| |
08ps (GOST 1050-88)
| 22,25,28,32 × 300,315,321,342
| | |
08ps (GOST 1050-88)
| 22,25,28,32 × 120,137,158,170,175,180,221,239,300,315,321,342,512; in Coils.
| Other widths as per agreement with the Works | |
08ps (GOST 1050-88)
| 22,25,28,32 × 300,321,342; in Coils.
| |
Scheme of packing for tinplate coils.
Fig. À.1
where:
1 — is imitation parchment
2 — bag paper
3 — waterproof cardboard
4 — wooden stools
5 — steel strip
The tinplate coils should be wrapped up in imitation parchment — (1) as shown in fig. 1 and 2 followed by bag paper — (2). Over and under the coil the sheets of waterproof cardboard — (3) should be placed or sheets of two-ply watertight paper. Between the turns of tinplate coil the newsprint paper should be laid. If agreed by the parties the coils can be delivered without paper between the turns.
The packed coils should be positioned between two or more wooden stools — (4) secured by two steel strips.
Total mass of the coil stack should not exceed 1.5 Mt.
The bottom stool should be fitted with three supporting bars with the section of not less than 60 x 60 mm.
If agreed with the customer the total mass of packed stacks should not exceed 1 Mt.
Fig. À.2 |
